Contents
AEG Service Center – 0545354777
Our company provide AEG service center refrigerator repair service, washing machine repair service home appliances maintenance of all the models of AEG service center. Our trained technical team figures out the problem at doorsteps and provides best solution of your appliance repairs at your door steps.
We provide same day services for the comfort and ease of customers. We repair all these appliances of AEG brand at AEG Service Center.
.
Our AEG Service Center locations in Sharjah
(Al Khan, Al Majaz, Al Qasba ,Al Taawun , Al Nahda, Al Wahda, Buhairah Corniche, Al Yarmook , Al
Qasimia , Al Nud , Abu Shagra , Al Nabba, Bu Daniq , Rolla , Muweilah , Butina)
Our AEG Service Center locations in Ajman
(Al Nuaimia , Al Mowaihat , Al Jurf ,Al Hamriya , Al Rashidiya , Emirates City, Al Zahra , Al Sawan , Al
Nakheel , Al Rumailah , Al Musharif )
Our AEG Service Center locations in Dubai
(Al Nahda, Al Qusais , Al Karama, Al Muhaisnah , Jumeirah , JVC , JLT Marina , Downtown , Business Bay , Zabeel , Al Barhsha , Al Wasl , Al Baraha , Al Mamzar)
Our AEG Service Center locations in Ras Al Khaimah
(Al Nakheel , Dafan Al Khor , Al Hamra Village, Mina AL Arab , Khuzam , Al Dhait, Marjan Island, Yasmin Village,Al Duhaisah, AL Qurm , AL Qusaidat )
AEG Washing Machine Error Codes
C9 Indicates an imbalance during a spin cycle.
F9 Indicates an imbalance during a spin cycle.
E10 Indicates problems with taking in water, not taken in enough water or problems with the drain.
E11 Indicates problems with taking in water, not taken in enough water or problems with the drain.
C1 Indicates problems with taking in water, not taken in enough water or problems with the drain.
E30 The error is caused by water at the bottom or inside the machine.
C3 The error is caused by water at the bottom or inside the machine.
E40 The appliance door / lid is open or not closed correctly, the appliance is overloaded, the door lock is faulty.
E41 The appliance door / lid is open or not closed correctly, the appliance is overloaded, the door lock is faulty.
E60 (or any code beginning with E6) It generally refers to a heating problem with the machine.
E80 or emits 8 flashes Indicates that the cycle selector was set incorrectly, or the washing machine possibly started with the cycle selector set halfway between two wash cycles.
E90, E91, E92, E93 or E94 It indicates configuration / communication problems with the electronic parts.
EAO Error message EA0 indicates DPS (Drum Position Sensor) fault.
EA0 Error message EA0 indicates DPS (Drum Position Sensor) fault.
Eb0 It may indicate problems with the too low voltage of the power supply.
Ebo It may indicate problems with the too low voltage of the power supply.
EF0, EFo, EF3 Use less detergent.
EHO / EH0 Indicates a problem with the power supply.
EH1 Frequency of power supply out of range.
EH2 Supply voltage too high.
EH3 Supply voltage too low.
E20 Indicates pumping problems. Washing machine does not drain, the drum does not turn, the appliance makes an unusual noise because of the blockage of the drain pump.
AEG Oven Error Codes
F0 – No Alarm Signal
The main control board in your oven has failed to communicate with the alarm.
This is most likely a fault with the control board itself, which may need replacing.
F1 – Door Not Locking
If there is an issue with the door lock in your appliance you may see this error code. Check the door lock and the wiring and connections to it to get to the cause of the fault
F2 – Door Not Unlocking
The opposite fault to the above, this fault indicates your oven door won’t unlock.
Once again you’ll need to check the door lock mechanism and its wiring and connections. This fault could also be down to the oven thermostat as this could be giving an incorrect temperature reading, preventing the door lock from being released.
F3 – Self Test Error
Turn off your appliance, unplug it for five minutes or so and plug it back in again.
Doing so should clear the F3 error code. Easy as that!. If it does not clear the problem you are likely to have a fault so see the links to our diagnosis videos below.
F4 – Temperature Sensor Fault
If you see this error code you’ll need to check your temperature sensor and the wiring and connections between the sensor and the main control board. You may need to replace the sensor.
F5 – Control Board Error
This fault suggests a problem has developed with the main electronic control board in your AEG oven or call AEG Service Center. It may need replacing to bring your machine back to full working order again.
F7 – Mains Supply Issue
You’ll see this fault if your oven has detected a problem with the power coming into it. This could mean your appliance has been wired in incorrectly. You’ll need to check the mains supply connection to your oven to get to the bottom of this error code.
F8 – Power Supply Issue to Control Board
The main control board is not receiving power as it should. Check the wiring and connections to it. If all the connections are fine, you’ll possibly need to replace the control board.
F9 – Processor Auto Resetting
As with error F3, turning off and unplugging your appliance for five minutes before plugging it back should reset and fix this fault code.
AEG Dishwasher Error Codes
E1
Tap is not open or water intake is restricted or water pressure is too low.
E2
Contact an Authorised AEG Service Center.
E3
Contact an Authorised AEG Service Center.
E4
Issue with drain system.
Cycle indicator light is flashing.
Previous cycle needs to be cancelled.
Beeps 3 times or the LED flashes 3 times
Leak indicated, water collecting at the bottom of the appliance.
AL5
Beeps once, or the warning light flashes once. Indicates a problem with the water
inlet. You can Call AEG Service Center.
C1
Beeps once, or the warning light flashes once. Indicates a problem with the water
inlet.
F1
Beeps once, or the warning light flashes once. Indicates a problem with the water
inlet.
i10
Beeps once, or the warning light flashes once. Indicates a problem with the water
inlet.
i11
Beeps once, or the warning light flashes once. Indicates a problem with the water
inlet.
C2
Beeps two times or light flashes two times. Dishwasher does not drain the water
properly.
F2
Beeps two times or light flashes two times. Dishwasher does not drain the water
properly.
i20
Beeps two times or light flashes two times. Dishwasher does not drain the water
properly.
AL6
Beeps two times or light flashes two times. Dishwasher does not drain the water
properly.
i30
Draining constantly or leaking constantly.
i40
Filter is not clean.
i43
Filter is not clean.
i44
Filter is not clean.
i50, i51, i52, i53, i54, i55, i56, i57, i58, i59, i5A, i5B, i5C, i5D, i5E, i5F
Dishwasher needs resetting.
i60
Dishwasher needs resetting.
i80
Dishwasher needs resetting.
iC0, iCo, iC1, iC2, iC3
Dishwasher needs resetting.
iF0, iFo or iF1
Dishwasher needs resetting & Water supply needs to be checked.